型号CK-C特性及应用 CK-C系列为无轴承支撑的楔块式单向离合器。径向尺寸与标准轴承尺寸相同。使用时需配合轴承安装，以承受轴向负载与径向负载。出厂时已加注润滑脂。 标准安装方式为CK-C型号与轴承同轴并列，相同的公差要求。内环与轴用键联接，外环尺寸公差为n6须与公差为k7的机壁过盈配合，但机壁的刚度要足够。 该系列常用于包装、印刷、食品、医疗、纺织、化工等机械设备上。 Description: Type CK-C is a sprag type freewheel non-bearing supported. Nominal dia.-direction diameter is a standard ball bearings dimension. Bearings are required to support axial and radial loads. Units are delivered grease lubricated. A standard arrangement is to install this type besides a bearing with the same housing diameter tolerance as mounting example. The inner race is keyed to the shaft. The outer race has n6 tolerance to give a tight fit in k7 housing. But the housing must be strong enough. This series extensive used in machinery system of packing, printing, papermaking, weaving, chemical, medical, food and so on. 型号 CK-C
欢迎访问川代轴承机械下属网站：
川代机械轴承网
